Climate champer for Battery testing (PEV-1.2)

Description

Specifications

Model                                      Vertical, floor model

Inner                                        Size in mm 1000 x 1000 x 700mm

Capacity                                  700 Liters

Temperature Range                 +20°C to +80°C ( – Degree will be optional cost)

Controller                                GIC make microprocessor based digital PID temperature controller cum                                                     indicator will be provided.

Resolution                               0.1°C

Sensor                                     RTD, PT100, class-A sensor will be provided to monitor the temperature.

Controlling Accuracy              ±1°C

Load                                        100 Kg’s maximum

Interior                                    1.2mm (18 SWG) thick SS304 with matt finishing will be the inner layer.

Exterior                                   1.2mm (18 SWG) thick MS with powder coated will be the outer layer.

Insulation                                100mm thickness high density glass wool insulation will be provided.

Door                                        Single door, double walled insulated & interior lined with SS304,silicon                                                     gaskets for leak proof, lock, handle & heavy-duty hinges for door.

Uniformity                              Heavy duty axial fans will be provided for forced air circulation to maintain                                               uniform conditions inside the chamber within permissible limit.

Air Heaters                              SS tubular heaters with fins will be provided

Compressor                             Hermetically sealed single stage refrigeration system with Emerson make                                                    compressor will be provided for Cooling

 

Condenser & Evaporator        Air cooled type copper tubes & fins will be provided

 

Refrigeration Features

          • Refrigerant-CFC Free (ECO friendly) will be used.
          • Drier for compressor safety will be given.
          • Overload cut off relay for compressor safety.
          • Efficient oil return managing system for protection of compressor
          • The additional isolation suspension channel with antivibration pads are provided to reduce the vibration & noise level
          • High speed axial fan will be provided for better condensation.

Electrical Features

            • Schneider make MCB’s & contactors will be provided for motor & other loads
            • L&T make main switch will be provided.
            • Emergency cut-off switch will be provided
            • SSR will be using for Heater efficiency
            • Door interlocking switch will be provided
            • Door open alarm will be provided
            • Fire and temperature retardant wires will be using
            • Ceramic cables will be provided for heaters.
            • High temperature safety cut off through thermostat.
            • Air circulating fan will control by door locking switch.
            • Power supply:230v, single phase,50Hz