Description
This power module is designed by using SEMIKRON –IGBT for EV Motor control (AC/DC/BLDC/PMSM Motor) applications. This power module can be used by proper external PWM controller interfacing (From RTGUI FPGA or OPALRT ). This Module consists of
Specifications
Power Circuit
- Input : 0-120VDC
- Output : 1 Ø /3Ø
- Capacity : 1KW / 3KW /5KW
- Number of PWM Input : 6
- Maximum PWM Frequency : 5 KHZ
- PWM Level : 0-3.3/5V (TTL)
- Three Number of IGBT-IGBT Power Module Rating @ 1200V , 160A based three phase Voltage source inverter Power circuit
- Model : SKM 100 GB12T4 (REFER ATTACHED DATA SHEET)
- IGBT is fixed with suitable heat sink and snubber circuit for protection
- IGBT Power circuit input and outputs are terminated by suitable rating banana connectors in front panel with necessary indication
- Six Number of PWM Isolator IC (6N137) is used to isolate All the six PWM signals input
- IGBT Gate Driver is provided for IGBT Gate signal amplification.
- 3 numbers of Hall effect current sensor @ 25A is provided for 3Ø output AC/DC Current measurement
- 1 numbers of Hall effect current sensor @ 25A is provided for Input DC bus Current measurement
- Op-Amp based Signal conditioner circuits are provided in all sensors for output current signals amplifications
- All current sensor signal conditioner circuit outputs are terminated in front panel by suitable connectors
- One number of automatic trip circuit is provided for O/C protection
- LED is provided for trip status indication
- Reset switch is provided for TRIP RESET
For More Details, Contact : shanmugam@powerlabinstruments.com
